HARDCOAT Solvent Based Sealer for Concrete and Exposed Aggregate
A decorative sealer for concrete and exposed aggregate to help against weathering and staining. Apply by brush, roller or airless spray.
Use to seal plain, imprinted and coloured concrete and exposed aggregate. Easy to use.
Excellent UV stability. Can be recoated if necessary. Dries to a medium sheen (satin finish).
Touch dry in 30 minutes. Can be opened to foot traffic in 1 to 2 hours (external application with good drying conditions). Resists weather, providing a clear, tough, easy to clean film.
Contains a UV stabiliser to prevent yellowing in exterior applications. Provides a dustproof surface. May be used on internal concrete surfaces (good ventilation and proper PPE required).
HARDCOAT slip reducing additive is also available to be incorporated into the HARDCOAT to provide increased grip in wet areas such as around swimming pools, garage floors, patios, etc.
Coverage:
4 – 12m2 per litre per coat
(Coverage is approximate depending on surface porosity)
Handy Tip: The more thin coats you put on, the shinier it will become .
Available in 4 Litre or 20 Litre Drum